Description
OMC/Johnson/Evinrude SST-45 Drain Elbow 0333105
The Johnson/Evinrude Drain Elbow is a cooling-system fitting used on the SST-45 / Formula Light powerhead. Installed in the upper portion of the cylinder and crankcase assembly, placing the elbow directly in the engine’s cooling-water drain/indicator routing.
What the Drain Elbow Does
The elbow provides a 90-degree connection point that allows cooling water to be routed away from the powerhead through the attached hose.
Its location and shape allow the hose to make the necessary directional change without being sharply bent or kinked.
Proper flow through this fitting helps maintain a clear path through the engine’s cooling-water indicator/drain circuit.
SST-45 / Formula Light Application
For the SST45 powerhead, the factory parts catalog specifies:
- Drain Elbow: 333105 / 0333105
- Quantity Required: 1
- Related Indicator Hose: 332992 / 0332992
- Location: Cylinder & Crankcase Assembly
- System: Cooling Water / Drain & Indicator Routing
Why the Drain Elbow Matters
Although it is a small fitting, damage or restriction at the elbow can interfere with water flow through the indicator circuit.
Possible problems include:
- Weak or bad water pump
- Water pickup tube misalignment,
- Cracked elbow
- Loose hose connection
- Internal blockage from debris or mineral deposits
- Hose kinking near the powerhead
- Water leakage around the fitting
A weak indicator stream does not automatically mean the elbow is bad, but the elbow and hose should be checked whenever cooling-water flow is being diagnosed.
Common Reasons to Replace 333105
Replacement should be considered when:
- The elbow is cracked
- Hose barb is damaged
- Fitting is loose
- Passage is restricted
- Debris cannot be removed
- Hose will no longer fit securely
- Original fitting is missing
- Powerhead is being restored or rebuilt
Because this fitting is exposed to heat, water, vibration, and repeated hose removal, older elbows can become damaged during service.
Inspect the Related Cooling Components
When servicing the drain elbow, also inspect:
- Indicator Hose
- Hose connection and routing
- Cooling water passages
- Water pump and impeller
- Cylinder head cooling passages
- Water outlet/indicator opening
A new elbow will not correct a restriction elsewhere in the cooling system.
Installation Tips
Before installing the elbow:
- Make sure the fitting passage is clear
- Inspect the mounting area
- Confirm the hose is in good condition
- Route the hose without sharp bends
- Make sure the hose is fully seated
- Check for leaks after starting the engine
- Verify normal cooling-water indicator flow
Avoid forcing an old hardened hose onto a replacement elbow, as this can damage the fitting or create a poor seal.
Key Features & Benefits
- SST-45 Specific Application – Factory-listed for the Formula Light powerhead
- Cooling-System Fitting – Provides the connection for drain/indicator water routing
- 90-Degree Design – Helps route the hose cleanly without excessive bending
- Ideal for Powerhead Rebuilds – Useful when restoring or servicing the cooling system
- Easy Inspection Point – Worth checking whenever indicator-water flow becomes weak or inconsistent
Performance & Racing Considerations
Cooling-system reliability is critical on an SST-45 / Formula Light race engine, where the motor operates at sustained high RPM and under heavy load.
At Liquid Revolutions, a weak or inconsistent water indicator is something we want to investigate before the boat goes back on the course. A small restriction, cracked fitting, or damaged hose can provide an early warning of a cooling-system problem.
The 0333105 Drain Elbow is a simple part, but keeping it clear and securely connected to the Indicator Hose helps maintain a reliable cooling-water path and gives the driver and crew a useful visual indication that water is moving through the system.

