Privacy Policy

Throttle

Throttle Cable

Price range: $69.00 through $78.00

The Teleflex / SeaStar Solutions CC205 Control Cable is a 479-type single-lever control cable designed for select OMC, Johnson, Evinrude, BRP, inboard, outboard, stern drive, and jet boat applications where an OEM-style 479 cable is specified.

Built with a stainless steel Lubri-Core wire, brass fittings, and a 6-inch minimum bend radius, the CC205 was a dependable standard-style replacement cable for many years.

Important: The CC205 series is being replaced by the newer CCX205 Xtreme Series. If your required CC205 length is no longer available, the equivalent CCX205 Xtreme cable in the same length will be shipped as the replacement.

SKU N/A Category

Description

Teleflex SeaStar Solutions CC205 – 479-Type Johnson/Evinrude/OMC Control Cable

The Teleflex / SeaStar Solutions CC205 Control Cable is a traditional 479-type single-lever control cable designed for marine applications using OMC, Johnson, Evinrude, and BRP-style control systems.

It has been widely used as an OEM-style replacement cable for outboards, inboards, stern drives, and jet boat applications where a 479-type control cable is specified.

The CC205 uses a stainless steel Lubri-Core inner wire with brass fittings and is designed as a direct-fit replacement in compatible control systems.

Important – CC205 Is Being Replaced by the CCX205 Xtreme Series

The traditional CC205 Standard Series is being phased out in favor of the CCX205 Xtreme Series.

The newer CCX205 Xtreme Control Cable is designed as a direct replacement for 479-type OMC/Johnson/Evinrude cables while providing improved cable movement and reduced lost motion.

SeaStar’s Xtreme cable design uses a patented splined core. The ridges on the core allow a close fit inside the liner while reducing the amount of surface contact, helping the cable move more freely.

If your required CC205 length is no longer available, the equivalent CCX205 Xtreme cable in the same length will be shipped as the replacement.

Why The Upgrade to the Xtreme Cable?

Compared with the traditional CC205 design, the CCX205 Xtreme cable offers several advantages:

  • Smoother Operation – Splined-core construction reduces friction inside the cable
  • Reduced Lost Motion – Provides a more precise connection between the control and engine
  • Improved Throttle Feel – Helps provide more consistent throttle response
  • Improved Shift Feel – Can reduce the loose or sloppy feel associated with worn or higher-friction cables
  • Better for Longer Cable Runs – Xtreme cables are especially useful where routing length or multiple bends increase cable resistance
  • Direct 479-Type Replacement – Designed for compatible BRP, OMC, Johnson, and Evinrude applications

Common Signs a Control Cable May Need Replacement

A worn, corroded, or deteriorating throttle or shift cable may cause:

  • Stiff throttle movement
  • Hard shifting
  • Excessive control-lever effort
  • Sloppy or loose control feel
  • Delayed throttle response
  • Difficulty reaching full throttle
  • Difficulty engaging forward or reverse
  • Cable binding
  • Uneven movement
  • Visible corrosion or cable damage

If the control lever has become noticeably harder to operate, disconnecting the cable at the engine can help determine whether the resistance is coming from the cable or from the engine/control mechanism itself.

Key Features of the CC205

  • 479-Type Control Cable – Designed for compatible OMC/Johnson/Evinrude control systems
  • OEM-Style Drop-In Replacement – Uses existing connection hardware on compatible applications
  • Stainless Steel Lubri-Core Wire – Designed for dependable marine control operation
  • Brass Fittings – Provides corrosion-resistant connection components
  • 6-Inch Minimum Bend Radius – Allows flexible routing in many marine installations
  • Available in Multiple Lengths – Select the proper cable length for your application
  • Throttle or Shift Use – Depending on control-system configuration

Common Applications

The CC205 / 479-type cable is commonly associated with compatible:

  • OMC outboards
  • Johnson outboards
  • Evinrude outboards
  • BRP control systems
  • Marine inboard applications
  • Stern drive applications
  • Jet boat installations using applicable OMC-style controls

The CCX205 Xtreme replacement is listed for 1979-current BRP/OMC/Johnson/Evinrude/Gale applications using BRP/OMC controls.

Because marine control systems vary, always verify the existing cable series, end fittings, control head, engine application, and cable length before ordering.

Choosing the Correct Length

Control cables are available in multiple lengths, and ordering the correct size is important.

When replacing an existing cable, the safest method is to identify the part number and length printed on the original cable whenever possible.

If that information is no longer readable, the cable should be measured using the appropriate marine-control-cable measuring procedure before ordering.

Avoid selecting a significantly shorter cable simply to reduce excess length. A cable routed with bends tighter than its specified minimum radius may bind or wear prematurely.

Ideal for Recreational & Performance Applications

Smooth throttle and shift operation is important on any boat, but it becomes especially important on performance and racing applications where precise throttle input and reliable shifting matter.

At Liquid Revolutions, we know that a control cable is one of those components that can gradually become harder to operate until you forget how smooth the controls are supposed to feel.

If an older CC205 cable is stiff, worn, or due for replacement, moving to the CCX205 Xtreme Series provides a modern direct-replacement option with improved cable technology.

Replacement Notice

CC205 cables are being replaced by the CCX205 Xtreme Series. If the CC205 length is no longer available, the equivalent CCX205 Xtreme cable in the same length will be shipped as the replacement.

Additional information

Weight N/A
Dimensions N/A
Length

10', 11', 12', 9'

Related Product

Hot Foot Spring

SKU:

HFS-1-DP
Ships Immediately
Retail Price: $25.00

Hot Foot Universal

SKU:

HF1DP
Ships in 5–7 days
Retail Price: $300.00